전체상품목록 바로가기

본문 바로가기

검색
현재 위치
  1. Light sources
(해외배송 가능상품)
공급사 바로가기
기본 정보
상품명 150W Xenon Light Source
상품요약정보 150W Xenon Light Source
국내·해외배송 국내배송
배송방법 택배
배송비 2,500원 (50,000원 이상 구매 시 무료)
SNS 상품홍보
SNS 상품홍보
구매방법

배송주기

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션
옵션선택

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

사이즈 가이드

수량을 선택해주세요.

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격
150W Xenon Light Source 수량증가 수량감소 0 (  )
총 상품금액(수량) : 0 (0개)

할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.

이벤트

Details
150W Xenon Light Source

Xe arc lamp light sources are the preferred artificial sources to simulate sunlight. The high color temperature (6000K) of the Xenon lamps is a close match to the solar temperature. This results in very similar solar spectra in the UV and VIS although the source has some Xe emissions lines in the near IR.
Application for fluorescence, luminescence and phosphorescence, absorbance and reflectance, photochemistry, photolithography, solar simulation and so on.
· Spectral range from UV to VIS(200-2500nm)
· Optical axis height is 157-193mm
· Output beam diameter is 46mm
· Supports wide range of accessories
· Fan cooled housing


More light

A spherical reflector collects the output from the rear of the lamp and focuses it on or near the arc, for collection by the condenser. The output is increased by as much as 60%.

Lamp adjustment

The housing has precise external lamp adjusters.
They let you place the arc where you want it. This is important for simplifying fiber and slit illumination. In many applications, this eliminates the need for readjusting any optics located beam path outside the housing.

Arc Lamp Power Supply


Current and light ripple

Direct current generated by rectification always has a current ripple (superimposed on the direct current). Current ripple is the main factor of cathode fissuring and therefore greatly influences lamp luminous flux or radiant power and lamp life.
But for the most (scientific) applications the light ripple is most important. This not only depends on the current ripple, but on the operation conditions typical light ripple of our arc light sources is 0.5%.

Igniters

To ignite an arc lamp it is necessary to ionize the insulation gas between the electrodes. This is done by a high voltage discharge or flash. To get the flash into a stable stationary arc discharge, certain conditions must be met:
A sufficient high ignition voltage from the ignitor and a sufficient high electrical energy in the ignition spark.
A sufficient quick start of current flow and adequate open circuit voltage.
The two last conditions must be achieved by the power supply. Some arc lamps require constant current, others constant power for optimal operation. The power supplies must be designed meet the operation conditions.



Current or power adjust

During operation the tungsten from the electrodes evaporates slowly and deposits on the inside of the lamp envelope. This reduces the radiated output by up to 30% during lamp life. If application requires constant light output, the lamp current must be adjustable within a certain range

Constant light output

The output intensity of a new lamp decreases continously during lamp life. To irradiate your targets with constant intensity (during lamp life) you must start a new lamp with 80% of lamp current or power value and then gradually apply higher current. When the rated current value is reached the lamp is statistically used up.

Specification of power supply
 
Voltage110/220V AC ±10%
Power consumption<250W
Power150W
Adjustable current7-9A
Current ripple≤0.05%(@8.5A)
Line voltage>20KV
Light output ripple0.05%(8.50A )
Ordering Information

To build a complete light source you will need: Lamp housing, condensing optics, lamp with appropriate adapter, electrical interface, cable and power supply. As an option we suggest the rear reflector for more output.
 
ModelDescriptionDetail
GLORIA-X150A150W Xenon Light Source150W Xenon Light Source(GLORIA-X150A)includes housing, power supply and lamp(LSB-X150)
Specification of power supply
 
ModelPower(W)Voltage(V)Current(A)Lifetime (h)Approx.
flux (lm)
Intensity (cd)Approx.Luminance
(cd/mm2)
Luminous
Area(mm)
Lamp size
(L*D)mm
LSB-X150AOFR15017.58.5300029002902000.5×1.6127*20
LSB-X150AUV150207.5300030003001500.5×1.7127*20
LSB-X150150188.510003200320— 0.8×2.0127*20
Note: LSB-X150AUV is UV enhanced with spectral range 200-2500 nm, please vent the ozone to the outside.


상품결제정보

고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등 정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.  

무통장 입금은 상품 구매 대금은 PC뱅킹, 인터넷뱅킹, 텔레뱅킹 혹은 가까운 은행에서 직접 입금하시면 됩니다.  
주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금을 하셔야 하며 입금되지 않은 주문은 자동취소 됩니다.

배송정보

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 2,500원
  • 배송 기간 : 3일 ~ 7일
  • 배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.
    고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.

교환 및 반품정보

교환 및 반품 주소
 - [17015] 경기도 용인시 기흥구 동백중앙로16번길 16-4 (중동) 에이스동백타워 1동 303호
 
교환 및 반품이 가능한 경우
 - 계약내용에 관한 서면을 받은 날부터 7일. 단, 그 서면을 받은 때보다 재화등의 공급이 늦게 이루어진 경우에는 재화등을 공급받거나 재화등의 공급이 시작된 날부터 7일 이내
  - 공급받으신 상품 및 용역의 내용이 표시.광고 내용과 다르거나 계약내용과 다르게 이행된 때에는 당해 재화 등을 공급받은 날 부터 3월이내, 그사실을 알게 된 날 또는 알 수 있었던 날부터 30일이내
 
교환 및 반품이 불가능한 경우
 - 이용자에게 책임 있는 사유로 재화 등이 멸실 또는 훼손된 경우(다만, 재화 등의 내용을 확인하기 위하여 포장 등을 훼손한 경우에는 청약철회를 할 수 있습니다)
  - 이용자의 사용 또는 일부 소비에 의하여 재화 등의 가치가 현저히 감소한 경우
  - 시간의 경과에 의하여 재판매가 곤란할 정도로 재화등의 가치가 현저히 감소한 경우
  - 복제가 가능한 재화등의 포장을 훼손한 경우
  - 개별 주문 생산되는 재화 등 청약철회시 판매자에게 회복할 수 없는 피해가 예상되어 소비자의 사전 동의를 얻은 경우
  - 디지털 콘텐츠의 제공이 개시된 경우, (다만, 가분적 용역 또는 가분적 디지털콘텐츠로 구성된 계약의 경우 제공이 개시되지 아니한 부분은 청약철회를 할 수 있습니다.)
 
※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
 (색상 교환, 사이즈 교환 등 포함)

서비스문의

상품의 사용후기를 적어주세요.

게시물이 없습니다

상품후기쓰기 모두 보기

상품에 대해 궁금한 점을 해결해 드립니다.

게시물이 없습니다

상품문의하기 모두 보기

회사소개

안녕하십니까?

저희 유니나노텍(주) 는 2008년 유니Think 로 출발하여 2012년 8월부로 법인으로 변경하고 사명도 변경하였습니다.
"You & I doing a NanoTechnology"

" 정직, 신속, 정확 " "상생협력" 등을 기본으로 항상 노력하도록 하겠습니다.

1. 광학 분야의 오랜 경험을 바탕으로 User에게 맞는 제품과 유용한 Solution을 제공하도록 최선을 다하겠습니다.
특히 Raman, Photoluminescence, Fluorescence 등 Optical spectroscopy 관련한 광학응용 관련 부품 및 응용분야에 적용할 수 있는 system공급에 도움이 되도록 노력하겠습니다.

2. 말보다는 행동으로 실천하는 업체가 되도록 노력하겠습니다.

3. 고객과의 약속의 소중함을 항상 생각하며 한걸음 한걸음 나아가도록 하겠습니다.

지속적인 격려와 응원 부탁드리며, 저희 유니나노텍의 도움이 필요하시면 언제든지 연락 주시기 바랍니다.

안녕히 계십시오.

2012년 8월 유니나노텍(주) 김 동현 올림.
바로가기

상품 Q&A

품질우선주의! 신뢰할 수 있는 기업!
궁금하신 점은 언제든지 문의주세요
바로가기

1:1상담

대량구매 문의 환영!
신속하고 친절하게 답변 드립니다.
바로가기


 

이전 제품다음 제품